Frozen pipes can create lots of pressure inside the pipe, which may lead to a burst fixture. When a pipe bursts, flooding can easily occur, and this can turn into a huge problem when no one’s around the house or if everybody’s asleep. Just imagine waking up in the morning and being greeted with pools of water in your home; that’s not how you want to start your day.
When temperatures go down, it is time to prepare your pipes to ensure that their functions remain. In this article, we will share eight tips to protect your pipes from freezing:
1) Adjust The Thermostat
Keep in mind that your indoor temperature must be between 55 degrees or higher at all times, especially when you will be gone for a few days. Even if this will cost you a bit more, it’s far cheaper than dealing with the damages that frozen pipes can bring.
2) Open The Doors
Keep the doors inside the house open to let warm air circulate in the area. You should also keep cabinet doors open so that the heat can reach the pipes under the sink.
3) Let Faucets Drip On Cold Nights
If your faucets are located on exterior walls that are at risk of freezing, let them drip. The slow trickle of water may relieve pressure so that the pipes won’t burst. Although it may not entirely prevent the pipes from freezing, it can still significantly reduce the risks.
4) Seal And Insulate Exterior Walls
If your plumbing runs through your basement or garage, you need to seal doors and windows in these areas with weather stripping and caulk to prevent air leaks. You can also insulate walls to keep the cold out. If low temperatures reach the inner fixtures, they can easily be at risk of freezing.
5) Deal With Exposed Pipes
For any exposed pipes that run through the garage or basement, you need to keep them from freezing by wrapping electrical heating tape around them. You can also get the ones that have built-in thermostats that will automatically turn the heat on and off when necessary.
6) Drain Water System If You’ll Be Gone For A While
If you’re going on vacation, be sure first to drain your plumbing and turn off the main water shutoff valve. With no water in the pipes, it will be unlikely for them to freeze. Also, you should open all faucets until the water stops running.
7) Winterize Automatic Sprinkler System
An effective way to winterize your sprinkler system is to blow out the pipes to remove standing water. This step is primarily performed when the frost level reaches below the depth of irrigation systems.
8) Insulate Hose Bibs & Exterior Pipes
Get faucet covers to protect your hose bibs. You can also use a towel and secure it with a rubber band and add a garbage bag to insulate and waterproof them. For exposed plumbing attached to the hose bibs, you can protect it with pipe insulation.
Protecting your pipes when the cold weather is fast approaching is important because frozen pipes can lead to costly damages that you will not want to deal with. Keep in mind that homes are also more vulnerable to frozen pipes in typically warmer climates because the pipes may not have proper insulation against frigid temperatures.
With that, it’s not only the cold season that can freeze your pipes, but also abnormally cold weather. This essentially means that if you’re in an area that experiences erratic weather conditions, then it’s important to ensure your pipes are protected.
Remember that you don’t have to do these tasks on your own—you can hire a professional to add protection for your pipes to prevent them from freezing. All you need to do is find a reliable contractor to help you out.
If you have a plumbing emergency in Calgary, AB, then you have come to the right place. Our experts at 24 Hour Plumbing & Heating have 20 years of plumbing experience, and we will perform repair, renovation and installation projects. Get in touch with us today to see how we can help!