Taking into consideration the chilly climate of Canada, it is extremely important for homeowners to have their water heaters in best working conditions all the time. It is important to get your storage heater tanks washed at least once a year if you don’t want them to give up on you when you need them the most. With time, a lot of calcium deposits and other unwanted sediments settle at the bottom of your water heater, which leads to clogging or loss of heating power. You can hire a good plumbing service provider for systematic cleaning of your water heaters or do it yourself. The steps are very simple to follow.
Step 01: Turn Your Water Heater Off
Whether you have an electric water heater or a gas water heater, it is important to turn it off before beginning your washing process. In case of a gas water heater, you need to turn the thermostat to pilot setting. This allows the water to cool down and gets your heater ready to undergo this maintenance or cleaning process.
Step 02: Turn Off the Cold Water Valve
The cold water valve needs to be turned off so the water flow force stops. Cold water valve is turned on to displace the hot water. If you don’t want to waste excess water while washing your water heater, it is best to turn off the cold water valve.
Step 03: Attach a Hose to the Drain Valve
Let the water inside the heater cool down for about two hours before draining it off. When you think the water is cool enough, attach a hose on the drain valve opening. Be sure if it has been attached perfectly or it could cause leakages. Place a heat-proof bucket on the other end of the hose or wherever the water is safe to be drained.
Step 04: Turn On the Faucets and the Drain Valve
Turn on one or more faucets to hot mode in order to release vacuum from the pipes. The faucets won’t release a lot of water since the cold water valve is turned off. Turn on the drain valve. You’ll need a screwdriver to turn on the drain valve. Keep the water flowing until it comes out all clear and free of all the sediments.
Step 05: Turn On Everything
Once the sediments and the waste is all flushed out, turn on the thermostat in case of gas heaters. Turn on the cold water valve and the heater switch.
These steps are very easy to follow. However, you might not have all the time in the world to actually do all the cleaning. This doesn’t have to mean that you can never get your water heaters cleaned. Hire 24 Hour Plumbing Heating for the best water heater cleaning or any plumbing services at any time of the day. Give us a call and we will be there at your service.
Water is a great asset. It is an indispensable source. Water is an inevitable energy without which many amenities will result in a crunch of water resources. But what if you had to settle with low water pressure in your house for several days in a row? That would be irritating, right? If you are already facing this issue, the following can be the reason behind it.
When water travels through pipes that make the water channel at your home, the water deposits pollutants, dirt, sticky substances, greasy dregs, and so on in your home pipes. Even a small amount of this can cause stubborn blockages in the piped system at your home. Moreover, when the main water supply system, connecting your hindmost exit pipe from your house to the public water system underground the street across your home, gets disjointed, the mineral buildup in the pipe mains leading to your house lands up with debris causing clogged pipes. This averts the water pressure in your home.
The steel and galvanized water system pipes need either no repair or replacement for almost twenty years or less. These piping systems end up with deep corrosion inside the pipes which block the smooth flow of water supply. The natural corrosive shreds or materials form in the pipes which impede the water flow or supply. Repairs and maintenance will not help at all. However, the replacement of all pipes in your home will prove to be beneficial to a great extent. The procedure to replace the pipes will cost profusely; however, once replaced, you don’t need to look after it for the next twenty years, comprising a few times for the rest of your lifetime.
If you spot a leak in your home’s common plumbing system, turn off all your taps and valve knobs either inside or outside of your house. This way, the water will be controlled and then measure on your water meter. Come back intermittently for a few hours. Then record the detail or scale on your meter. If the meter reading has changed, indicating a rise in water pressure, there is a water leak for sure. Call a professional plumber to fix the leak.
Municipal Water Trail
Many times, the hurdle in the public water system is caused by the same causes of low water pressure at your home. There could be clogged pipes, effluents hindering the water flow, the debris, mineral buildup sediments, corrosion within the pipes leaving semi-solid, solid and greasy wet material, water leaks, public plumbing misses and fails, and so on in the mainline too. This hampers the smooth water stream from the public water channel into our homes.
For all of these issues, we have the right solutions that will improve the water pressure by leaps and bounds. If you are seeking for a spike in water pressure control, visit or call us. We are equipped with 24/7 emergency platform in place to serve you around the clock.