Your septic system comes into play every time you take a bath, brush your teeth, flush a toilet, or do your laundry. This system carries waste water from your pipelines into the septic tank. Since it safely processes all of your wastewater and ensures proper sanitation, it is considered the most important part of your plumbing system.
If your septic tank breaks, the untreated and unsafe wastewater in your home comes back to your property. This is a serious plumbing issue that needs to be addressed as soon as possible. If you suspect something wrong with your septic system, here are some steps you need to take:
1. Avoid Overloading It
Your septic tank runs at a limited capacity since it can process only a certain quantity of wastewater at a time, depending on your property’s size. It usually dispenses wastewater at the same rate as or faster than it accumulates water. However, if it takes on too much water and fills up before it can empty itself, the excess water backflows through the pipes or your lawn instead of the tank.
Once you notice any signs of damage in your septic system, avoid overloading it with water to prevent dangerous sewage backups in your house. Call an emergency plumber and wait for them to arrive before using the system like normal.
2. Mind the Weather
The weather can sometimes slow down or even stop your septic system from processing normally for a certain period of time. For instance, severe storms can cause your septic alarm to go off or your drains to run much slower. To address this, consider using less water for the day. If the issue doesn’t resolve on its own after around 15 hours, seek experts in plumbing emergencies to check the underlying problem.
3. Determine the Exact Cause of Damage
Several reasons can cause your septic system to deteriorate over time. These poor conditions may seem ignorable at first but eventually become more serious over time. Here are some of the most common causes:
Most of the septic systems are underground, so you can’t check the damage yourself. It’s also unsafe to do so, especially if you don’t have the necessary training, skills, and equipment to do the task on your own. What you can do is to tell your septic contractor if you noticed any possible cause to help them diagnose the problem faster.
4. Call For Repairs
You have the option to ask for a tank pumping if you notice your septic system runs slowly. However, this is just a band-aid solution and does not actually fix the problem. It’s advisable to call for repairs as soon as possible to prevent further damage.
A problem with your septic system and tank can come in many forms: drains running slowly, toilets not draining properly, or wastewater pooling in drains or toilets. Besides causing nuisance due to foul odour, it can also lead you and your loved ones to suffer from health conditions when left untreated. For this reason, once you notice any sign of problems with your septic system, call a professional right away.
If you need help from skilled plumbers in Fredericton, then you’ve come to the right place. At 24 Hour Plumbing & Heating, we can make your septic tank up and running again in no time. Schedule an appointment today!
Water can seem pretty straightforward, but what many don't know is that it holds a bunch of minerals that can change the way your appliances work, how your food tastes, and more. When your water contains excessive levels of minerals, such as calcium and magnesium, then you have hard water in your property.
This is quite common since it makes up about 85 percent of the United States and Canada. Sadly, hard water can cause plumbing emergencies if you don't deal with your water situation.
Fortunately, some interesting mechanical systems can address this issue, such as a water softener. Water can already seem soft on the surface because of its physical attributes, but what triggers the issues are the minerals that it contains.
What is Hard Water?
Hard water is household water that has high concentrations of dissolved minerals like calcium and magnesium. Although these minerals aren't toxic and aren't harmful to drink, they can be quite destructive to your home's equipment and appliances.
When you have hard water, you'll always notice white, cloudy spots on your dishes, utensils, bathtubs, and sinks. In your teapots and kettles, you'll find crusty deposits at the bottom.
Besides that, hard water can also make lathering and rinsing much more challenging as it can make your items look faded and gray. Additionally, people with sensitive skin can experience irritation because of the high mineral content found in water.
What is a Water Softener?
Water softeners come in various sizes and types, so finding the perfect one for your home won't be as tricky. The water softener is installed by a home plumbing service in the basement, utility closet, garage, or wherever water enters your property.
Usually, a water softener will have a narrow water softener tank and a wide brine tank. These tanks connect to your home's water supply line, and a discharge hose runs to the softener tank to a nearby dry well or drainpipe.
Inside the softener tank, you'll find resin beads permanently sealed inside the tank. Since the brine tank has a removable lid, you can easily fill up the tank with salt pellets and potassium chloride pellets. These can help balance your water's mineral content, allowing you to soften your water.
How Does a Water Softener Work?
Your water will enter the water softener tank and trickle down through the resin beads. The resin beads have a negative charge, so it attracts positively charged minerals in your water. After that, the mineral deposits stick to the resin, and the softened water exits the tank and can flow through your house.
Once your beads have reached their maximum capacity, you'll have to regenerate your tank and flush it clean — this is where the brine tank gets to shine. The onboard computer of the tank will then calculate how much water has flown through the softener, and regeneration will begin automatically.
During the regeneration process, it slowly dissolves the potassium chloride and salt pellets in the tank. This is important because this mixture is responsible for washing your resin beads clean and will automatically revert to producing soft water.
Because of the complexity of the equipment, it's best to have a 24-hour plumber install the water softener for you. This way, you won't have to worry about experiencing tank issues and minimize the risk of water damage.
The Bottom Line: Do I Really Need a Water Softener?
If you want to protect your appliances, equipment, pipelines, silverware, and other metals in your home, having a water softener is ideal. Besides having to drink softer water and managing the amount of damage you get in your home, you'll also rest well, knowing you're eliminating certain health risks and plumbing issues.
Of course, you need to ask your 24-hour plumber if your home is eligible to have a water softener. And if you need it, it's best to have them install it themselves for your safety.
How Can We Help You?
If you're looking for a 24-hour plumber, look no further because we're here to help.
Here at 24 Hour Plumbing and Heating, we can solve your plumbing, heating, and air conditioning problems. Our team of experts provides various emergency services, such as sump pump installation, water softener and filter installation, drain cleaning, heating and air conditioning, septic tank repairs, and more.
Learn more about how we can help you by booking an appointment with us today!
In every household, good plumbing goes a long way! As a matter of fact, the quality of water we have at home can affect your daily activities. Since most water is derived from locally regulated water sources, however, you might be wondering if there’s such a thing as bad quality water. By the time it gets to your home, it must be usable, right?
Unfortunately, not all tap water is good water. In Edmonton, in particular, most tap water is hard water which can be harmful to your skin, toilet, and sink. If you want to avoid plumbing problems and extend the lifespan of your home appliances, you will need a water softener.
What does a Water Softener Do?
As its name suggests, water softeners can decrease water hardness. It is a must for those who want to extend the lifespan of their toilets, appliances, and faucets by improving the quality of the water that flows into these appliances. Those who also have tankless water heaters will also find water softeners useful in decreasing the build-up in the heat exchanger, saving them significant repair costs in the long run.
If you want to invest in a water softener, it’s important to narrow down your choices and select one that’s right for you. But how do you choose the best one? Here are a few things to consider:
Cost and Effectiveness
There’s no denying that you only want the best water softener for your money. While it should be of high quality, most homeowners still look for something affordable. If this is your main concern, the salt-based system is your best bet. This system uses beads made of resin to ionize the water flowing in the system with the help of salt. The only setback of this style is that it can be difficult to install, and you will need the help of professional plumbers.
Safe and chemical-free
Safety is also a top priority when it comes to water. After all, you wouldn’t want to use water that has been contaminated with harsh chemicals that can affect your body and appliances! If this is your priority, consider a magnetic system, which uses magnetic fields to soften the water.
Effective in purifying water
If you’re concerned with the water you’re drinking, you want a system that not only softens the water flow but also filters it. This is what the reverse osmosis system is for. With its 4 phase filtration process, it’s able to remove impurities from drinking water. This can be commonly installed in kitchen faucets. The best thing is that an RO system can be installed on both hard and soft waters! The difference is you will just need to replace the filters on hard waters a bit more compared to the soft water.
Size of the softener
Size matters when it comes to choosing water softener size. You have to consider how many gallons of water your home consumes daily. Once you estimate the total gallons per day, just multiply it by the number of grains per gallon from your water supply. Since this can be tricky, you can get professional help from us here at 24 Hour Plumbing and Heating.
There are so many factors to consider when choosing the best water softener: cost, effectiveness, safety, and size! It can be difficult to figure it out on your own, so professional help from plumbers is a big step in getting the water softener you need.
For all your water softener and filter services in Edmonton, contact us 24 Hour Plumbing and Heating. We can solve everything—from water heating repair to plumbing!
We are available after hours as well.
A water filter connected to your water main can provide your family with clean water. However, water filters do not last forever, and over time, they can slowly deteriorate. This can lead to contaminated water, foul-smelling water, and other water-related issues you do not ever want to face in your next glass. Although frequent maintenance is effective at preventing water-filter-related problems, knowing the signs that your water filter is failing and needs replacement is vital.
With that being said, here are the signs that your water filter needs to be replaced:
1) The Filter Is Lit
Some filters come with a light indicator that lights up when the filter is not working intended. This can mean anything, one of them being that the filter itself needs to be replaced. If you have such a filter, check it once in a while to see if the light is on. If it has, we recommend calling a technician to fix the problem. Though you might want to tackle the problem by yourself, having a professional fix the problem ensures a job well done.
2) The Water Looks Cloudy
Other than the fact that the water will start to taste bad when the filter reaches the end of its life, there is another sign you can catch before this happens. You should watch out for the turbidity of the water or how cloudy it is. You can do this by filling a glass with water and shining a light through it. If it is cloudy, the filter needs fixing.
3) The Smell Is Unpleasant
Water that has not been filtered properly will have an unusual and unpleasant smell. At this point, the water is already unsuitable for drinking, so you will need to have the water filters checked. Generally, the smells are there because the filter has become dirty and inefficient. If replacing the filters does not fix the problem, you may need to consider replacing the entire water filtration system.
4) the Water Pressure Is Dropping
The water pressure in your home should remain consistent. This means plenty of water coming out of your faucets, showerheads, and such. If it seems like the water pressure is dropping, it may be because the water filter is getting full. However, other things can also lead to a drop in pressure, such as leaks. It is recommended to hire a plumber to identify the cause of the problem.
If you notice any of the above signs in your water, chances are that problems in your water filters caused the issue. We recommend that you hire professional plumbers for the job rather than tackling it by yourself. There may be other issues contributing to the problem that only a plumber can fix.
Plus, a plumber will have the tools and know-how to properly replace the filters to ensure the water in your home is safe and clean to use. You would not want to put your family at risk of water-borne diseases simply because you are trying to save money. Keep your home and family safe by working with the experts!
24 Hour Plumbing & Heating offers various plumbing, heating, and air conditioning services such as drain cleaning, frozen pipes, sump pump installations, and more to create safe and comfortable homes. If you are looking for an emergency plumber in Calgary to fix your water filters, contact us right away!