Although homes in Ottawa are connected to the municipal sewer system, when backups occur in your sewer line, it’s your responsibility to have it addressed. Sewer backups are due to a clog in the home’s major drain or sewer line. When homeowners do not have proper disposal of their mown grass and other waste materials, the sewer line can be more prone to blockage and other damage that can cause backups.
When a sewer backup situation occurs in your home, it’s always recommended to let the professionals handle it. If you’re going to inspect the problem, here are tips on how to safely do it:
– Wear Protective Clothing Before Inspecting a Backup
According to experts, untreated wastewater can be a place for up to 10 million virus particles per litre to thrive. It can even have 100,000 to 10 billion E.coli per litre. Not only that, but there could also be a multitude of dangerous pathogens floating on the water, such as protozoa and worms.
Just imagine if you will get infected by those pathogens. Your health will definitely be at risk! This is why a clogged main sewer should not be ignored. Before inspecting it, make sure to gear up properly. Wear protective clothing, including boots, gloves, and protective face masks. Even if you will only do a quick inspection, it is still of utmost importance to protect yourself from such health dangers.
– Find Out Which Toilets or Drains Have Backed Up
When your sewer is clogged, the wastewater will go back and accumulate to your home. As it rushes back, some of it can also pass through the homes through lower-ground vents and drains.
Because of that, the priority areas that you should check are the basement and floor drains. You’re lucky if there’s not so much wastewater that accumulated in those places. In case water continues to gush out of your floor drains, you need to contact emergency plumbers as soon as possible.
Check and Unclog the Cleanout
Some minor backups usually recede several minutes after. If that’s the case, you may only need to clean the building drain of your home. Make sure to unclog the cleanout as well. It is usually a pipe measuring 3-6 inches in diameter. A small portion of this cleanout must be protruding from the ground, so it will be visible and accessible. There should be a plug on its topmost section that you can remove by using a wrench.
Cleaning should be done carefully because this can be full of dirt, water, and solid waste. Remove all the clog from the building drain before replacing its cover. After removing the clog from the cleanout, let a small amount of water flow into one of the lower-ground taps. This will allow the wastewater to flow to the sewer line.
However, if you notice that there are still backups, it can be due to a damaged sewer line. Make sure to call a licensed plumber to deal with the issue.
Hire a Sewer Backup and Drain Repair Expert
When your home has multiple sewer backups, you need to call a professional. There’s no need to wait longer and let the problem worsen. The longer you ignore having the drain lines cleaned, the more clogs will accumulate in them. Ensure that you call a reliable plumbing expert in your area to help you with sewer backups.
A sewer backup should be taken as a serious issue in your home. In fact, it may require an emergency plumbing service. The good thing is that there are sewer backup experts who can help you deal with the problems at any time of the day. They will come to your home and inspect the plumbing system to discover the main cause of the backup.
If you have a plumbing emergency like sewer backup issues, call 24 Hour Plumbing & Heating right away! We provide a wide range of HVAC and plumbing services, from drain cleaning to air-conditioning repair. Contact us today for more details.