Replacing Your Sump Pump

18 Jan. 21

Replacing Your Sump Pump – 3 Top Signs to Look Out For

Although it is a part that is not often seen, your sump pump plays a crucial role in protecting your home. It’s what pulls water flowing into your basement away from your foundation and into your wastewater system. It’s also what minimizes the damages to your house brought about by basement flooding in the event of street flooding.

Since it performs this huge role, you want to make sure that it will continue to do so in the future. However, just because it has been functioning well for the past months doesn’t mean that it will keep doing so. You will need to actively maintain it and, ultimately, know when it has to be replaced.

To help you out, here are three common signs that you need a new sump pump installation soon.

1) A Constantly Running Sump Pump

One surefire way to confirm that your sump pump has gone out of order is if it keeps running regardless of water levels in your basin—and even after all the water is emptied.

This defect will only put an unnecessary strain on the motor of your pump. Ultimately, if it keeps running without any water to cool it down, it will overheat and eventually break down.

Another possible cause of a constantly running sump pump is a defective check valve. This fitting is equipped into the discharge line, which is the tube that moves water out of your basement and towards a drainage site. The check valve then keeps water from flowing back into your sump pump pit.

However, if it has become defective, water pumped out of the pit will only return to the basin. This will put your sump pump in a never-ending cycle of pumping the same water. Examine your check valve immediately to prevent the problem from escalating.

2) A Clogged Sump Pump

Just like other items and fixtures in your home, your sump pump basin will accumulate grit over time. This is especially true if your pump is uncovered.

Considering this, you must be mindful of the mechanism’s condition. Too much grit and other forms of buildup can cause the impeller fan blades to jam. Furthermore, if the water has large amounts of sediment and debris, the pump inlet and discharge line can easily become clogged. A clogged discharge line then causes water to rush back down the pipe and into your basement.

It also pays to remember that when small gravel, loose silt, or dirt makes their way into your pump, they can make it hard for the pump to work. It will turn on, but it will not be able to empty water out of the basin efficiently.

These particles can also jam the float switch and keep it in the same position. A malfunctioning float switch can then exhaust your sump pump’s motor.

3) Loud Noises

Your sump pump will naturally create subtle sounds when pushing up the water through the discharge pipe. However, if you are noticing loud gurgling, clanging, or rattling noises, get in touch with an emergency plumber in Calgary, AB as soon as possible. These noises are far from normal. On top of that, efficient sump pumps make only minimal noise when functioning.

Your emergency plumber will be able to get to the root of the problem and advise you if your sump pump is due for a replacement.


While your sump pump is often out of your sight, it plays a key role in keeping your house’s structure safe from water damage. It drains water away from your foundations and out of your basement. Considering this, diligently maintaining your pump and watching out for the signs listed above will help keep it in its peak performance. Ultimately, these steps help you get a replacement right when it is necessary.

For any kind of plumbing emergency in Calgary, AB, you can turn to us at 24 Hour Plumbing & Heating! We know that plumbing emergencies don’t wait, so we’re ready to help you 24/7. Contact us today to make an appointment!